-70 %
Brand: FlyRobo
Model: FR-06-386
This is a 3D Printer CNC Lead Copper Nut 2x2mm. It is used with Lead Screw in general machine tools such as 3D printing.Features:Made from brass and is very reliable in linear motion applications.Provides easy to install and convenient to use.Not compatible with 8mm lead screw and 2 mm pitch.Package..
₹39 ₹129
Out Of Stock
Brand: FlyRobo
Model: FR-06-387
This is a 3D Printer CNC Lead Copper Nut 2x8mm. It is used with an 8mm Lead Screw in general machine tools such as 3D printing.
Features:
Made from brass and is very reliable in linear motion applications.
Provides easy to install and convenient to use.
It is compatible with 8mm lead sc..
₹149
-59 %
Brand: FlyRobo
Model: FR-06-221
The RAMPS (RepRap Arduino Mega Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade..
₹240 ₹579
-91 %
Brand: FlyRobo
Model: FR-06-205
M6X26 1.75 Print Extruder Pipes For 3D Printer.
Features:
Material: Stainless Steel
Inner diameter: 2mm
Outer thread: M6
Suitable for 1.75 Filament
Application: 3D printer extruder
Package included:
1 x 3D printer extruder pipes..
₹26 ₹299
-54 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-388
3D Printer FES V1.0 Filament Detection Sensor is used to detect ABS, PLA, or any other filament continuity before feeding to the printer extruder.
Its Main Function: To check the filament whether runs out or not, it automatically turns off the 3D printer when the filament runs out.
Wiring:
..
₹155 ₹339
-15 %
Out Of Stock
Brand: FlyRobo
Model: FR-06-240
The PCB heat bed is a great addition to your 3D printer to help your printing platform to be a heated surface perfect for minimizing warping of larger prints. The heating element is on the bottom side. The heating is done by long traces of copper. The top side is solid copper to keep the PCB flat en..
₹489 ₹577
-19 %
Brand: FlyRobo
Model: FR-05-902
We are pleased to present the OpenBuilds BX24 Wheel Pulley, the precise way to improve your 3D printing experience. These pulleys are made with state-of-the-art technology to ensure smooth operation and accurate control in your 3D printer.
The BX24 Wheel Pulley has an excellent construction with ..
₹37 ₹45
-29 %
Brand: FlyRobo
Model: FR-06-448
This is a 3D Printer Parallel Stepper Motor Module for Dual Z Axis used for small printers or small current motors in parallel. It is designed for a stepper motor-side parallel, a driver drives two motors, and put them in-line (series) with the motor.
Features:
Easy to connect.
Cable Leng..
₹71 ₹99
Out Of Stock
Brand: FlyRobo
Model: FR-06-380
3D Printer Z Axis Platform Supporting Spring has a long compression length, the spring force can be fine-tuned, and the performance is good.
Features:
Each spring can generate up to 1.6 kg of compression force, good elasticity.
Perfect replacement for the old one and has a long service li..
₹15
-51 %
Brand: FlyRobo
Model: FR-06-381
3D Printers Printer Stepper Mute Filter Module Protector Stepstick Smoother can effectively eliminate low-speed non-uniform waveform signals so as to achieve a relatively flat signal waveform.
Features:
Plug and work, no wiring required
Effective to use.
The effect is most obvious with ..
₹97 ₹199
-43 %
Brand: FlyRobo
Model: FR-06-603
5V 3007 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 5V DC power supply which can be easily powered from the RPI board. It has a 2 pin JST connector to easily ..
₹101 ₹176
-29 %
Brand: FlyRobo
Model: FR-06-605
5V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. This fan can be directly connected to Raspberry Pi pins 4 and 6.
The cooling fan operates on a 5V DC power supply which can be easil..
₹88 ₹125
