Brand: FlyRobo
Model: FR-01-980
The four spindles on the ICSH044A Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module Hall Effect Sensor have a tiny circular magnet in the end; each of these is paired with an SMD hall effect sensor, which is used to measure up, down, left, and right movements of the trackball.
..
₹364 ₹589
Brand: FlyRobo
Model: FR-01-517
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Feature and Specification:
EYE BLINK indication by LED
Instant output digital signal for directly Connec..
₹249 ₹900
Brand: FlyRobo
Model: FR-01-844
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.
Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. ..
₹36 ₹99
Brand: FlyRobo
Model: FR-05-231
DC 12V 1A Push-Pull Solenoid Electromagnet, 10mm 5N Push-Pull Type, open frame type, linear motion, plunger spring return, open coil form, DC electron magnet. Used widely in home appliances, vending machines, a game machine, auto door lock.
This DC 12V 10mm 5N Push-Pull Solenoid Electromagnet c..
₹251 ₹499
Brand: FlyRobo
Model: FR-01-801
A compact but high-powered DC-DC step-up (boost) power supply converter module. The module features a wide operating supply range and a power supply input voltage between 3.5 to 35V that can step-up this input voltage from 4V to 35V.
The module includes an integrated voltage meter that can m..
₹321 ₹699
Brand: FlyRobo
Model: FR-07-300
This power supply is an automatic step-up/down power supply module. When the output voltage remains constant, the input voltage is equal to the bottom, up or the output voltage. For example, to set output as 12V, the input voltage between 5 ~ 32V output voltage is always 12V. It can achieve continuo..
₹631 ₹1,449
Brand: FlyRobo
Model: FR-01-992
RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters. The module has ESD 15KV protection. Onboard to increase the limit of 10 ohms current limiting current protection. Module with TVS diode. Anti lightning, peak voltage. The module has 120-ohm termination resistors, whi..
₹137 ₹299
Brand: FlyRobo
Model: FR-01-955
Features:
1. Place it directly on a breadboard with red and blue lines.
2. With DC-005 round hole plug input, input voltage 6.5-12v, compatible with most power adapters.
3. With USB input, it can be directly connected to computer USB or 5V power supply.
4. With Micro USB input, most mobi..
₹60 ₹99
Brand: FlyRobo
Model: FR-01-803
This is MCP2515 CAN Bus Module with TJA1050 Transreceiver which can adopt CAN controller MCP2515 and TJA1050 high-speed CAN transceiver. Onboard independent key. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation.
This is easy to use CAN bus module controlled via..
₹97 ₹379
Brand: FlyRobo
Model: FR-01-956
The Mini360 buck converter step down voltage regulator board is designed for use with RC airplanes, quadcopters, drones, RC cars, Arduino and other micro-controllers, and other DIY electronics needing an ultra-miniature, lightweight step-down voltage regulator.
It uses an integrally molded power ..
₹26 ₹84
Brand: FlyRobo
Model: FR-01-957
Features:
Special power module for breadboard, compatible with 5V and 3.3V.
Apply to the MB102 breadboard, very useful for Arduino breadboard projects.
DC 6.5-12V or USB power supply the input voltage.
The output voltage can be switched between 3.3V and 5V.
Two-way independent control ..
₹50 ₹69
Brand: FlyRobo
Model: FR-01-894
MT8870 DTMF Decoder Module is ideally suited to adding dual-tone multi-frequency (DTMF) decoding to your project. This detection module interprets the incoming tone and produces a coded output that can be connected to all manner of microcontrollers.
DTMF is commonly found in touch-tone devices su..
₹105 ₹147