-43 %
Brand: FlyRobo
Model: FR-01-668
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
₹28 ₹49
-45 %
Brand: FlyRobo
Model: FR-01-715
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
₹49 ₹89
-50 %
Brand: FlyRobo
Model: FR-01-729
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹65 ₹129
-67 %
Brand: FlyRobo
Model: FR-01-710
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹26 ₹79
-30 %
Brand: FlyRobo
Model: FRM-01-626
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For Arduino
Parameter:
Power supply voltage: +5 v
Support the I2C
With the Blue backlight, and contrast to adjust potentiometer
Four line output more simpler
Package included:
1 x LCD Display Module with Backlight
..
₹264 ₹379
-65 %
Brand: FlyRobo
Model: FR-01-712
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of a lig..
₹31 ₹89
-64 %
Brand: FlyRobo
Model: FR-01-701
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down.
The X and Y axes are two 10k potentiometers that control 2D movement by generating analo..
₹32 ₹89
-72 %
Brand: FlyRobo
Model: FR-01-708
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do..
₹25 ₹89
-67 %
Brand: FlyRobo
Model: FR-01-704
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module co..
₹23 ₹69
-87 %
Brand: FlyRobo
Model: FR-01-831
This air pressure sensor is suitable for biomedical, meteorology, and other fields. The core part is the pressure sensor chip which is made by the MEMS pressure technology.
Features:
Solid-state
MEMS technology
High reliability
low cost
Measuring and controlling media width
Wide t..
₹67 ₹499
Brand: FlyRobo
Model: FRC-01-686
RFID Card used for Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz.
Package Content:
10 x RFID Card tag..
₹175
-33 %
Brand: FlyRobo
Model: FR-01-688
This is a 13.56MHz RFID IC Key Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 13.56MHz, these tokens are all pre-programmed with unique ID numbers to commu..
₹16 ₹24
