Brand: FlyRobo
Model: FR-01-745
FT232RL USB to TTL 3.3V 5V Serial Adapter Module is a basic breakout board for the FTDI FT232RL USB to serial IC.
The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sket..
₹129 ₹219
Brand: FlyRobo
Model: FR-01-543
This hm-10 Bluetooth module with BLE 4.0 support, Internal with logic level conversion circuit. No external 5V level to turn into a 3.3V level Power input with anti-anti-circuit. Avoid accidental power plug reversed.
Generally, users are using the HC-05 Bluetooth module but it doesn't suppor..
₹230 ₹399
Brand: FlyRobo
Model: FR-01-517
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Feature and Specification:
EYE BLINK indication by LED
Instant output digital signal for directly Connec..
₹249 ₹900
Brand: FlyRobo
Model: FR-01-979
The Infrared IR Wireless Remote Control Module Kit for Arduino consists of ultra-thin infrared remote control and 38KHz infrared receiver module. This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
..
₹56 ₹119
Brand: FlyRobo
Model: FR-01-844
IRF520 MOSFET Driver Module is a breakout board for the IFR520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller.
Here is a simple breakout board for the IRF520 Mosfet. Easy hookup to your Arduino or another 3-5v microcontroller. ..
₹36 ₹99
Brand: FlyRobo
Model: FR-01-858
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.
This module is flexible in configura..
₹279 ₹449
Brand: FlyRobo
Model: FR-01-429
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega is Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb.
It is a customized version of the classic ARDUINO MEGA R3 board. Full integration of Atmel ATmega2560 microcontrol..
₹1,489 ₹1,999
Brand: FlyRobo
Model: FR-01-460
This Multifunction Shield For Arduino Uno / Leonardo is all in one shield for beginner users of the Arduino Development Board.This Arduino Uno and Leonardo compatible multifunction experimenter shield (HCARDU0085) has a large range of features which makes it ideal for beginners who just want to expe..
₹225 ₹289
Brand: FlyRobo
Model: FR-01-628
This I2C 0.96" OLED Display Module is an OLED 128×64 dot matrix display module with I2C Interface. It is perfect when you require an ultra-small display for projects. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, hig..
₹209 ₹329
Brand: FlyRobo
Model: FR-01-683
RC522 - RFID Reader /Writer with Cards Kit includes a 13.56MHz RF reader and writer module that uses an RC522 IC and two S50 RFID cards tag. The MF RC522 is an integrated transmission module for contactless communication at 13.56 MHz. RC522 supports ISO 14443A/MIFARE mode. RC522 - RFID Reader f..
₹63 ₹149
Brand: FlyRobo
Model: FR-01-748
RDA5807M FM Stereo Radio Module is a high sensitivity, low power consumption, ultra-small size of the FM stereo radio module.
Using RDA Microelectronics of RDA5807M, this circuit fewer external components, the noise factor is minimal. Its highly cost-effective single-chip FM stereo radio module...
₹63 ₹98
Brand: FlyRobo
Model: FR-01-685
RFID Card used for the Contactless transmission of data and supplies energy without battery. it works on the frequency of 125khz. These tags come with a unique 32-bit ID and are not re-programmable.
This is a basic VLF RFID Clamshell Card/Tag used for presence sensing, Access Control, etc. The c..
₹19 ₹77