5 Way Tactile Switch Module is a tiny 5-way tangible switch (up, down, left, right, and center click), which can be used to detect the switch position and click. This module is a breadboard-friendly control board.
Features:
The switch operates in four directions, along with a push as well -..
This is a 75mV FL-2 DC Current Shunt used for a 50A DC current amp meter.
Features:
Model: FL-2
Easy to install and remove
Good performance, strong and durable.
Package Includes:
1 x 50A 75mV FL-2 DC Current Shunt...
This is half bridge weight sensor (load cell) of measurements range up to 50 kg. It can be used for measuring weight, linear force, or even thrust.
50kg Half-bridge Experiments Body Scale Load Cell Sensor is measuring; the correct force is applied to the outer side of the strain E-shaped beam por..
This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportionality of, the strain (e.g. pressure or force) applied to the bar..
This 5V 1 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 1 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
Features:
Compact size
Totally silent operation
Led ..
This 5V 2 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
Features:
Compact size
Totally silent operation
Led ..
Ideal for controlling the switching of up to 8 devices using this high-level triggered solid state relay board. It can switch AC electrical lines of up to 240V and 2A.
5V 2A 8-Channel SSR Solid State Relay Module which can control up to 2A at 240VAC. This is an 8 Channel SSR relay module, each r..
CD42 5V 2A Charge and Discharge 3.7V 4.2V Lithium Battery Boost Module, when using a lithium battery, its charge, and discharge need circuit protection to protect the lithium battery from being charged or damaged or to obtain a safe power supply from the lithium battery. The module has four LED ind..
This 5V 4 Channel SSR – Solid State Relay Module 240V 2A Output. SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module which has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed).
Features:
Compact size
Totally silent op..
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
This is 5V 8-Channel Infrared Remote Control Relay Module, associated with switching and isolating components, which makes interfacing with a microcontroller or sensor easy with minimum components and connections. The input ground is common to all eight channels.
Features:
Channel: 8 channe..
It is an 8 Channel Isolated 5V 10A Relay Module, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A ..