This 5V Ultrasonic Humidifiers Power Circuit Board for Moisture Film Humidification atomization machine is; suitable for the atomization plate tablet with a diameter of 20mm. Just provide the DC3-12V power supply it will turn into a mini ultrasonic atomizer.
This Ultrasonic Humidifier Piezoelectr..
5v-12v Mini ZVS Induction Heating Power Supply Module is a high-quality module board for induction heating power supply.
Features:
The DC power supply voltage is 5V to 12V.
Easy Installation
Maximum power 120W(12V induction heating).
Plug and Play operation
Specifications:
..
6050 Electret Condenser Mini Microphone with Wire is able to provide high-quality audio. The condenser microphone uses a capacitance that varies in line with the incoming signal to generate the varying output voltage.
Features:
Size: 6x5 mm
Communication: Wired
Package Includes:
1..
This is 60Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Development Board. At the bottom of the PCB are solder pads for soldering wires. This ring consists of a set of four pieces that need to be soldered together to form a ring.
Features:
IC Chip: WS2812B
No of Light: 60
..
It is a DIY kit for a digital alarm clock and is equipped with 6 digits LED module. It has a programmed AT89C2051 MCU chip, precise time display, 24 hours format, supporting seconds correction, countdown clock, stopwatch, counter, hourly chime, and alarm clock functions.
Features:
Equipped ..
6J2 Tube Pre-Amplifier Kit is the circuit schematic imitation design team Music fax X-10D, to be rational optimization, more stable performance. This board uses a single 12V AC input battery, the processing circuit provides a 6J2 tube required positive and negative voltage and voltage supply filamen..
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
74HC4051 8 Channel Analog Multiplexer Module used for a DIY project. 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.
Features:
Three digital select inputs (S0, S1, and S2), eight independent inputs..
This is a 2 Digit 0.5inch 7 Segment Digital Tube LED Display Module, each digit controlled by a 74HC595 integrated. It can use the screen with a microcontroller, for example, Arduino. The monitor connects to the microscope using only three signal cables and two power cables. The operating voltage is..
The 74HC595 Static Drive 3 Digital Tube Display Module is here to introduce you to a seamless and fascinating digital display experience!
Prepare to boost your projects with this sophisticated and adaptable module. Its cutting-edge design smoothly drives three digital tube displays with exception..
The 8Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Circular Development Board has a round black shape. 8 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB.
These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input..
8 Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Development Board has a Straight black shape. Each LED is addressable as the driver chip is inside the LED. The color of the light was highly consistent and cost-effective.
Features:
IC Chip: WS2812
Color: RGB
No of Light: 8
..