BH1417 PLL FM Transmitter includes features like pre-emphasis, sound limiter, stereo transmission, low pass filter, PLL circuit, FM oscillator, and rf output buffer.
The sound limiter maintains the same audio level so no distortions occur, the stereo encoder separates the left and right channel e..
iBeacon BLE Module is for Apple iOS 7.0 or Android 4.3+, Bluetooth 4.0+. It supports Near-field Positioning Sensor Wireless Acquisition.
Features:
BT version: Bluetooth Specification V4.0 BLE
Modulation method: GFSK(Gaussian Frequency Shift Keying)
RF Power : -23dbm, -6dbm, 0dbm, 6dbm, ..
On-Board Diagnostics, or OBD, in an automotive context, is a generic term referring to a vehicle’s self-diagnostic and reporting capability. OBD systems give the vehicle owner or a repair technician access to the state of health information for various vehicle sub-systems. ELM327 Bluetooth CAN-BUS s..
Bluetooth Serial Transceiver Module Base Board can install Bluetooth modules, such as HC05, HC06, HC07, BC04, or other compatible Bluetooth modules.
Features:
Input voltage 3.6V to 6V, must not exceed 7V
The pin-outs include TXD, RXD, STATE ( if any ), KEY ( if any ) common pin
Compatib..
The Bluetooth Module is the latest Bluetooth wireless serial cable! This version of the popular Bluetooth uses the HC – 05 / 06 modules. These modems work as a serial pipe. Any serial stream from 9600 to 115200 bps can be passed seamlessly from your microcontroller to your target. You will need..
The BME280 is an environmental sensor designed for mobile applications with low power consumption and size constraints.
Features :
BME280, which is the precision sensor, is soldered onto the PCB.
You can access a sufficient amount of weather data by connecting it through I2C, which will h..
BMP180 Digital Barometric Pressure Sensor Module is used for measuring barometric pressure and altitude. It also has a temperature sensor for temperature compensation of pressure measurements. It uses push sensors for the BMP180. It offers a pressure measuring range of 300 to 1100 hPa with a relati..
BMP180 Digital Barometric Pressure Sensor Shield for the D1 Mini allows for precise measurement of atmospheric pressure and temperature and can be connected over WiFi. It is combined with a D1 Mini ESP8266 board, this information can be communicated via the internet and be used to control a system.
..
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is the cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space.
Basically, anything you need to know about atmospheric conditions you can find out fro..
Brass G1/4 inch Water Flow Sensor is used to measure water (liquid) flow in your application. This is a good quality flow sensor with a brass body and can be used for industrial and commercial applications.
This 1/4 inch water flow sensor is used extensively in various types of vending machines...
This is Buzzer Shield V1.0.0 Module for Wemos ESP8266 D1 Mini.
Features:
Frequency: 1kHz-3kHz
It has 4 optional control pins (default: D5)
Package Includes:
1 x Buzzer Shield V1.0.0 Module for Wemos ESP8266 D1 Mini..
The strain gauge is a foil metal strain gauge, widely used in pressure sensors and weighing sensors.
It shares features of high accuracy, good stability,fully-closed structure, and automatic compensation of temperature and creep. Specifically, its backing material is made of modified phenolic wh..