The CAN protocol is one of the most common standards for data exchange between controllers, remote sensors, and actuators for combining them into a single network structure. Reception and transmission of information are carried out in a sequential form according to the principle of packet switching...
Capacitive Soil Moisture Sensor V2.0 measures soil moisture levels by capacitive sensing rather than resistive sensing.
It is made of corrosion-resistant material which gives it excellent service life. Insert it into the soil around your plants and impress your friends with real-time soil moist..
This is USB Output 9V/12V/24V to 5V 3A DC-DC Car Charging Voltage- Stabilizer Module. It can be directly installed on a 9V/12V/24V vehicle battery to charge the mobile tablet or any other gadget which needs 5V DC supply up to 3A.
Package Includes:
1x Car Charger DC-DC 9V/12V/24V to 5V USB 3A ..
This clear Bracket/case/holder for PIR Motion Sensor Detector Module HC-SR501 has two screw holes for the module to be attached to the bracket, and two to connect the bracket securely to your project. Nuts and screws are also included. The perfect accompaniment to our Pyroelectric Infrared PIR Motio..
Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Case Holder you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently.
Features:
Easy to install.
Thickness:2.8mm – 3.1mm
I..
CC1101 is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 868 MHz, but can easily be programmed for operation at other frequencies in the 779-928 MHz bands. It is designed for very low-power wireless applications.
Features:
..
This is a breakout board that mounts a 74HC4067 which is a 16-channel analog multiplexer/demultiplexer that can route both analog and digital signals in both directions.
1 of 16 input channels can be routed to 1 output or 1 input can be routed to 1 of 16 output channels. It can handle analog sig..
CDM324 Microwave Body Radar Induction Switch Sensor is a 24 GHz band single-channel radar transceiver. These Radar sensors are used for detecting, locating, tracking, and recognizing objects of various kinds at considerable distances. It operates by transmitting electromagnetic energy toward objects..
CH340G chip TTL 3.3V / 5V level switchable output (with bridge) 3.3V and 5V output voltage to supply the programmed controller With PWR, TXD, and RXD power light indicator light used to upgrade various devices.
Features :
This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
..
The module can be used for serial expansion, I2C interface EEPROM,SPI interface FLASH, and STC MCU programming, program debugging, data acquisition, brush machine, etc. CH341A USB Converter Module equipped with CH341A chip, CH341A is a USB bus adapter chip, through the USB bus to provide asynchronou..
CH376S USB U Disk Read Write Module supports USB-Device Mode and USB-HOST Mode. It is used as a file manage control chip, used to MCU system read/write a file in USB Flash Drive or SD card.
Features:
Chip: CH376S
File operation is simple and fast.
It supports three communication interfa..
CHQ1838 IR Receiver is a miniaturized receiver for infrared remote control systems. IR Receiver can detect any signal of 38 kHz and give output at pin 3 after processing it. It includes a photodetector and preamplifier in one package and an internal filter for PCM frequency. It has very low power co..