The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
HC-05 is a Bluetooth Transceiver Module and has TTL Output. HC-05 6 Pin Wireless Serial Bluetooth Module is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make it easy to send and receive data wirelessly. This Bluetooth module is a completely qualified Bluetooth V..
HC-06 is the popular Bluetooth module. It’s very easy to add wireless serial connectivity for your device with this module. Examples for Arduino and other boards are available. Once you pair with other Bluetooth devices you work like with normal UART to exchange data.
This module has a built-in ..
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For Arduino
Parameter:
Power supply voltage: +5 v
Support the I2C
With the Blue backlight, and contrast to adjust potentiometer
Four line output more simpler
Package included:
1 x LCD Display Module with Backlight
..
The sensor module light is adaptable to the environment, with a working voltage of 3.3 V to 5 V. It has a pair of infrared transmitting and receiving tubes when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving by the tube.
After the comparator circuit pro..
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino is a Single channel signal output Sensor. The output is effective to the low-level sound signal with good fidelity, When there is sound, outputs low level and signal light.
sound detection module has two outputs:..
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of a lig..
The sound module is the most sensitive to the environment sound intensity, commonly used to detect the intensity of the sound of the surroundings. When module in the intensity of the sound environment can not reach a set threshold, the OUT will output a high level, when the intensity of the sound fr..
The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech!!!
The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing co..
This is an Optical slot speed measuring sensor for Arduino. Widely used in motor speed detection, pulse count, the position limit, etc.
The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder..
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down.
The X and Y axes are two 10k potentiometers that control 2D movement by generating analo..