The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices. The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be ..
MAX31855 is easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors, and level shifting circuitry.
Features:
It comes with a 2 pin terminal block for connecting to the thermocouple...
MAX4466 Electret Microphone Amplifier breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT.
It is simple to connect GND to ground, VCC to 2.4-5VDC. The output will have a DC bias of VCC/2 so when its perfectly quiet, the vol..
MAX471 sensor can measure current and voltage. The principle of voltage test based on the principle of resistive voltage divider design can make the red terminal connector input voltage to 5 times smaller. The MAX471 chip on the board was used to test the consumed current of the load.
Features:
..
MAX6675 Module with K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface for giving an accurate temperature-compensated measurement of the supplied K-Type th..
The MAX6675 Thermocouple Sensor Module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide an accurate temperature-compensated measurement of the supplied K-Type thermocouple sensor.
The..
The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors to 7-segment numeric LED displays of up to 8 digits or 64 individual LEDs. It includes an on-chip BCD code-B decoder, multiplex scan circuitry, segment and digits drivers, and an 8x8 static RAM ..
This 8 digits seven-segment display module is based upon the Maxim MAX7219 LED display driver. The module uses two standard 4 digit seven segment displays to display a total of 8 digits in RED with a decimal point. A convenient input and output header allows additional modules to be daisy-chained.
..
This is the MAX7219 Dot Led Matrix Module MCU Control LED Display Module incorporating the MAX7219 Driver chip. By using this dot LED module in your upcoming project, you will be able to add some great cool animation.
The MAX7219 is an integrated serial input/output common-cathode display driver..
MAX7219 4-in-1 Display Dot Matrix Module is an integrated serial input/output common-cathode display driver, it connects the microprocessor 7-segment digital LED display with 8 digits, you can also connect a bar graph display or 64 independent LED.Thereon including a B-type BCD encoder chip, multi-c..
The MAX9814 is a low cost, high-performance microphone amplifier with automatic gain control (AGC) and low noise microphone bias. The device features a low-noise front-end amplifier, a variable gain amplifier (VGA), an output amplifier, a microphone bias voltage generator, and an AGC control circuit..
MAX98357 I2S 3W CLASS D Audio Amplifier Module accepts digital audio through the I2S interface and converts it to an analog output signal and amplifies it to allow direct speaker connection. It combines an I2S D/A converter with an audio amplifier on one board.
MAX98357 I2S 3W CLASS D Audio Ampli..