MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System produces the signal when moved away from each other which can be fed to the microcontroller to perform the desired action as per requirement. It is used as a door or window security alarm.
It is trigger by the magnet. When the magne..
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.
This module is flexible in configura..
This is MCP2515 CAN Bus Module with TJA1050 Transreceiver which can adopt CAN controller MCP2515 and TJA1050 high-speed CAN transceiver. Onboard independent key. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation.
This is easy to use CAN bus module controlled via..
MCU-103 Rotation Angle Sensor has a dustproof design that protects the interior from dust, which maintains stable performance. It is compatible with high peak lead-free soldering. temperatures.
Features:
Excellent resistance materials and high-reliability wiper achieves 1 M cycles
D forma..
The MCP23017 consists of multiple 8-bit configurations for input, output, and polarity selection. It provides a 16-bit general-purpose parallel I/O expansion for the IIC bus.
Features:
High-Speed SPI InterfaceConfigurable Interrupt Source
External Reset Input
Configurable as active-high..
OPT3001 chip is used to measure the intensity of light as visible to the human eye. The precision spectral response and strong IR rejection of the device enable the OPT3001 to accurately meter the intensity of light as seen by the human eye regardless of the light source.
Features:
Model:..
MCU-3221 INA3221 Three Way I2C Output Current Power Monitor monitors both shunt voltage drops and bus supply voltages, in addition to having programmable conversion times and averaging modes for these signals.
It is a three-channel, high-side current and bus voltage monitor with an I2C- and SMBUS..
MCU-758 ACS758LCB-050B-PFF-T Linear Current Sensor Module provides economical and precise solutions for AC or DC current sensing. It is widely used in applications that include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurren..
The MCU-83 AEDR-8300 is a compact, high-resolution 2-channel optical encoder designed for precise motion control applications. It features an integrated photodetector array and a 3.3V operation, ensuring low power consumption. With a resolution of up to 318 counts per inch (CPI), it delivers accurat..
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the output of the module is low, lower power consumption; When a finger touches the corresponding position, the output of the module is high, if not touched for 12 seconds, it switches to low-pow..
Description:
Materials: Thin Film Packaging
Performance: Precision
Rating: 1 (W)
Frequency characteristics: Low Frequency
Temperature coefficient: NTC
Size: 25mm
Feature:
MF5B series products for synthetic fuses thin-film encapsulation type
Insulating film packaging, the..
The carbon dioxide sensor has an MG-811 onboard as the sensor component. The MG-811 is highly sensitive to CO2 and less sensitive to alcohol and CO. The output voltage of the CO2 increases.
It is a carbon dioxide sensor (CO2) sensor that is a Metal Oxide Sensor, which must heat the tank to the s..