Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Case Holder you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently.
This mounting case holder is made from good quality Acrylic. I..
MP3-TF-16P MP3 Disk TF Card Module Serial Port is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module with battery power supply, speaker, the keypad can be used alone, or through the serial port control, as the Arduino UNO or any microcontroller with a serial p..
The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to ..
The MPU6500 GY-6500 6DOF 6 Axis Accelerometer Gyro Sensor is now available.
Get ready to discover a whole new level of accuracy in orientation and motion tracking when using the MPU6500 GY-6500 6DOF 6 Axis Accelerometer Gyro Sensor. This small but effective sensor is the best option for applicati..
MPU9250 9DOF 3 Axis Gyro Accelerator Sensor Module has a 9 Degrees of Freedom Sensor. It comes with an onboard 3 axis accelerometer, 3 axis gyroscope, 3 axis magnetic field sensor all in one single compact board. It allows an easy and direct interface between the sensor and a microcontroller, throug..
MPX10DP is a dual-port uncompensated Silicon Pressure Sensor for environmental control systems and level indicators. The MPX10 series silicon piezoresistive pressure sensor provides a very accurate and linear voltage output, directly proportional to the applied pressure.
Features:
Patented..
The MQ131 Gas Sensor Module is manufactured with materials that are sensitive to ozone. In the presence of the ozone gas, the sensor’s conductivity is more higher along with the gas concentration rising. Please use a simple electro circuit, Convert the change of conductivity to correspond output sig..
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
MQ2 Gas Sensor is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke, and so on. Based on its fast response time measurements can be taken as soon as possible. Also, the sensitivity can be adjusted by the potentiometer.
MQ2 gas ..
The analog gas sensor - MQ2 is used in gas leakage (like Smoke methane and liquified flammable gas) detecting equipment in consumer and industry markets, this sensor is suitable for detecting LPG, i-butane, Propane, Methane, Alcohol, Hydrogen, and Smoke. It has high sensitivity and fast response tim..
This MQ-3 Alcohol Detector Gas Sensor Module is simple to use. MQ-3 Alcohol Detector Module which can sense the presence of Alcohol in the air. It has high sensitivity and a fast response time. This Sensor provides an analog resistive output based on alcohol concentration.
The onboard potentiomet..
This is a simple to use MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module which can sense the presence of Compressed Natural Gas(CNG), methane(CH4), etc in the air. The onboard potentiometer can be used to set the maximum gas concentration beyond which the digital output gets triggered...