The MQ-5 is used in gas leakage detecting equipment in consumer and industry applications, this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol, cooking fumes, and cigarette smoke. The sensitivity can be adjusted by the potentiometer. The sensitive material of..
This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has high sensitivity and fast response t..
This MQ7 Carbon Monoxide Gas Sensor Module is a semiconductor gas sensor tuned to detect carbon monoxide. It is in the same family of devices as the smoke detector sensor, measuring the change in surface conductivity of tin dioxide in the presence of carbon monoxide. This sensor has high sensitivity..
This sensor module has an MQ-8 as the sensor component and has a protection resistor and an adjustable resistor on-board. A sensitive material MQ-8 Module H2 Alarm Detection use in clean air low conductivity tin oxide (SnO2). Using a simple circuit to convert the change in conductivity of the gas co..
MQ-9 gas sensor using gas-sensitive materials with lower conductivity in clean air tin oxide (SnO2). MQ-9 Module can be used to sense Carbon Monoxide and Methane Gas. High and low-temperature cryogenic loop detection mode to detect carbon monoxide sensor conductivity increases with the increase in t..
MS-1100 VOC Gas Sensor Module is mainly used to detect formaldehyde, toluene, benzene, and other VOC gases, is a semiconductor type sensor, it is widely used in ventilation equipment, ventilation fans, air filters, hoods, and other equipment.
Features:
High sensitivity and stability
It ca..
MS5540-CM Digital Pressure Sensor Module is an SMD hybrid device including a high-precision pressure-resistant pressure sensor and ADC interface IC. It is a miniature version of the MS5534C barometer/altimeter module, and provides a 16-bit voltage depends on the temperature and pressure parameters.
..
This is XY-016 DC-DC Step Up 2A 5V/9V/12V/28V Power Module with Micro USB. The whole network's smallest adjustable boost module can be easily installed in a variety of small pieces of equipment.
This Multipurpose tiny and very cheap voltage booster can be very useful in your various DIY project a..
MT8870 DTMF Decoder Module is ideally suited to adding dual-tone multi-frequency (DTMF) decoding to your project. This detection module interprets the incoming tone and produces a coded output that can be connected to all manner of microcontrollers.
DTMF is commonly found in touch-tone devices su..
The best option for precise and effective power monitoring in a variety of applications is the NA226 IIC Interface Bidirectional Current Power Monitoring Sensor. The NA226 has you covered whether you're controlling power consumption in industrial machines, maximizing energy use in a data center, or ..
IO Expansion Shield For Arduino Nano is specifically designed to facilitate an easy connection between Expansion Shield For Arduino Nano and many other devices. In essence, it expands for the Arduino Nano controller to link those devices in a simple and trouble-free manner.it will be the Nano all pi..
This Nano Ethernet Shield allows you to connect the Arduino Nano to a network. It is assembled with long stackable pin headers, and don’t need to solder the headers separately.
The Nano Ethernet Shield is based on the ENC28J60 Ethernet chip which provides a network (IP) stack capable of both TCP ..