Experience precise environmental monitoring with the Temperature and Humidity Atmospheric Pressure Sensor AHT20+BMP280. This advanced sensor duo combines the accuracy of the AHT20 for temperature and humidity readings with the BMP280's reliable atmospheric pressure measurements.
Ideal for weather..
TEMT6000 Ambient light sensor acts like a transistor the greater the incoming light, the higher the analog voltage on the signal pin.
It is a silicon NPN epitaxial planar photo-transistor in a miniature transparent mold surface mounted onto a printed circuit board. The device is sensitive to the ..
TF-Luna is a small light-weight single-point ranging LiDAR, based on the TOF(Time of Flight) principle. The product is built with algorithms adapted to various application environments and adopts multiple adjustable configurations and parameters so as to offer excellent distance measurement performa..
The 2.4 inch TFT touch Screen LCD Module For Arduino is a large touchscreen display shield with a built-in microSD card connection.
The LCD has excellent vivid color contrast. This TFT display is big, bright, and colorful. 240×320 pixels with individual pixel control. It has way more resolution ..
TJA1050 Module is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It provides differential transmit capability to the bus and differential receive capability to the CAN controller. TJA1050 is a high-speed CAN transceiver.
Features:
It has an..
TLP281 4-Channel Optocoupler Isolation Module electrically isolates a controller from the high-power system by use of an opto-isolator IC. It is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board uses the TLP281 optoisolator and discrete ..
The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Disp..
The TM1638 Button Digital LED Display Module is used in chip TM1638, a collection of these three common MCU peripheral circuit, the biggest feature just takes three microcontroller IO port to drive, do not need to scan display and key scanning microcontroller intervention, only need to read the rele..
The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy s..
Temperature sensors effectively transmit the electrical signals into data that can be used for any application.
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any e..
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players, and development boards.
TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extr..
The TSL235R light-to-frequency converter outputs a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). The device has been temperature compensated for the ultraviolet-to-visible light range of 320 nm to 700 nm and responds over the light range of 320 nm..