The four spindles on the ICSH044A Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module Hall Effect Sensor have a tiny circular magnet in the end; each of these is paired with an SMD hall effect sensor, which is used to measure up, down, left, and right movements of the trackball.
..
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.
Specifications and Fea..
IP5328P Boost Charging Bidirectional Fast Charging Mobile Power can support a total charging port 4: 2 USB-A output interface, a USB-C interface, Micro USB interface, four interfaces supports fast-charge, wherein two support USB-A port QC3.0, FCP, AFC, MTK, SFCP fast charge output power of up to 18W..
IPEX to SMA Female External Adapter + SMA Male Antenna for 2.4G WIFI Module can be used for a wide array of wireless applications like point-to-point or point-to-multipoint architecture. The broadband characteristics of the antenna enable it to operate over a very wide frequency range with consisten..
L7812 is equipped with a heat sink, and a 3A rectifier bridge can meet high-current output. It uses a full-wave bridge rectifier, AC or DC can be entered, and the input regardless of positive and negative electrodes. Filtering using two large-capacity electrolytic capacitors 35V 220UF do buffer filt..
This is an LM2596 DC-DC step-down converter with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with an Arduino nano, Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater t..
The LM2596 DC Buck Step Down Power Converter Module is a compact and efficient solution for converting higher voltage DC power sources to lower voltage outputs. With its versatile design, it can handle input voltages ranging from 3V to 40V, making it suitable for a wide range of applications. Its ad..
The LM317 DC-DC converter is an electronic circuit for converting a DC source voltage from one level to a lower level. This module is important in some portable electronic devices such as cell phones and laptops, which are primarily supplied by power from batteries.
The step-down voltage can be ..
Matrix Nand Programmer MTX SPI NAND Flasher V1.0 features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX 360 models. It is also fully compatible with NAND PRO 2.0e and several other third-party programming tools.
Features:
..
MAX3232 Mini RS232 to TTL Converter Module for an electrical level converter.
The RS232 to TTL 5V Signal Converter Module is a professional module for projects requiring PC/Laptop RS232 interface to 5V TTL logic. This module converts signals between RS232 voltage levels and TTL voltage levels. It..
MAX3232 RS232 to TTL Serial Port Converter Module is based on Max3232 IC to convert RS232 level to TTL level easily. The board has a DB9 connector soldered at one end, and four header pins with jumper cables at the other end. The jumper cables enable to connect the wires to a breadboard or a microco..
The MAX485 TTL To RS485 Module converts the TTL signal to RS485 for long-range, high data rate error-prone differential communication. Digital communications networks implementing the EIA-485 standard can be used effectively over long distances and in electrically noisy environments.
Multiple rec..