This is the T8 Trapezoidal Lead Screw Nut Housing Bracket Conversion Seat Block. It makes the lead screw more stable, without shaking.
Features:
Color: Silver
Suitable for housing the T8 lead screw nut.
Applications: For 3D Printer
Note: The lead screw is not included in this, only..
Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button is pressed t..
TEA5767 Stereo FM Radio Module with Detachable Antenna is made using TEA5767, a single-chip electronically tuned stereo FM radio for low voltage applications. It has fully integrated Intermediate Frequency (IF) selectivity and FM demodulator.
The radio is completely adjustment-free and is very ea..
This is a Thermal Conductive Silicone Pad of size 40x40x1mm, used for good thermal conductivity between IC and heatsink. Heat can be conducted from the internal device to the metal shell or the heat sink plate Improve the efficiency and service life of heating electronic components.
Features:
..
This is a Thermal Conductive Silicone Pad of size 70x22x1mm, used for good thermal conductivity between IC and heatsink. Heat can be conducted from the internal device to the metal shell or the heat sink plate Improve the efficiency and service life of heating electronic components.
Features:
..
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat ..
This TPA3118 PBTL 12V 24V Power Mono Digital Amplifier Module comes with very good sound quality. The module equips a Mono digital audio power amplifier chip. A large area of copper and dense vias hole enhances heat dissipation. it has current limiting, short circuit, and over-temperature protection..
This is Clear Plastic Case for Arduino UNO R3. The case is a two-piece injection-molded enclosure that holds together around the Arduino and it holds the Arduino firmly in place. As it is transparent is perfect for letting you see your Arduino Uno and make any needed adjustments easily.
Features:..
TXB0104 Board is a 4-bit bidirectional voltage-level translator with automatic direction sensing. It features four channels of input/output signals and an output enable line that allows the signal lines to be placed in a high impedance mode when they are unneeded.
Features:
4-Bit Bidirecti..
ULINK2 Debug Adapter connects your PC's USB port to your target system (via JTAG, SWD, or OCDS) and allows you to program and debug embedded programs on target hardware. The software used on the PC will be Keil-MDK.
Features:
Supports various ARM7, ARM9, Cortex-M, 8051, and C166 device..
An Ethernet cable can be connected to a USB port with this Card Adapter. Instead of utilizing a USB cable, which is typically shorter and less dependable, to link numerous devices together, users can utilize USB to Ethernet adapters to connect them using an Ethernet cable. With Plug-and-Play technol..