The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processsors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no s..
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer.
Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity a..
USB A to B Cable for Arduino UNO and MEGA Boards. It is also called a printer cable that is used in printers. These cables are used to connect our Arduino UNO or Arduino MEGA Boards to flash our code.
Features:
Type: USB Type-A to Type-B Connector
Length of cable: 30cm
Fully compatible ..
USB Charger Doctor to measure the working voltage and current output for any USB port and project. This blue plastic dongle plugs between a USB device and passes the data lines through. There’s a 0.05-ohm resistor in line with the power pin that is used to measure the current draw.
The Doctor’s d..
USB Charging Discharge Resistance Current Detection Load Tester can easily test the mobile power charging treasure, cell phone charger, USB power output current is standard, as long as the resistance USB port to the above line.
And can carry on an aging test to mobile power and USB power adapter..
Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector.
Accepts Input voltage from 0.9V to up to 5V.
Features:
On-board CE8301 Chip
Input voltage: 0.9V-5V DC
PFM Control DC-DC Converter
Transfer efficiency: 96%(max)
With USB port
With worki..
The best option for smooth power connectivity is here: the USB DC5.5 x 2.1mm Wire Connector DC Plug Power Cable. This thin, flexible cable is made to connect USB devices to DC 5.5 x 2.1 mm power ports with ease.
For a variety of applications, our USB DC5.5 x 2.1mm Wire Connector DC Plug Power cor..
This is a USB 2.0 female connector. It is very useful if you want to link a project with a USB connector for the power supply or data exchange. Standard size USB 2.0 socket mounted on a small PCB. No delicate soldering is required. This USB connector can be easily attached to your projects.
Featu..
The USB to RS485 Converter Adapter module support WIN7 XP Vista Linux Mac OS provides an easy to use RS485 interface by means of a Virtual Com Port on the user's system.
There are no command structures, whatever is sent to the Virtual Comm Port is automatically converted to RS485 and vice versa...
The USB to RS485 TTL Serial Converter Adapter FT232 is USB2.0 standard, backward compatible, in line with the standard RS485. It has Direction control with the use of automatic data flow control, auto distinguish and control data transfer direction with Baud rate of 300-9216000bps and automatically ..
Features:
1. This downloader supports 3.3V and 5V STC full range of all SCM burning procedures.
2. The highest baud rate 115200 perfect support! No longer for the STC10 series, STC12 series, STC11 series, STC15 series of burning distress.
3. The programmer automatically downloads witho..
USB Type-A 4-Pin Male Connector Socket complies with the Universal Serial Bus implementers forum. The USB 2.0 architecture allows transmission speeds up to 480 Mbit/s (60 MB/s). The benefits of using USB 2.0 are reduced transmission times and power consumption.
Features:
USB 2.0 Type A Mal..