Brand: FlyRobo
Model: FR-01-217
L7812 is equipped with a heat sink, and a 3A rectifier bridge can meet high-current output. It uses a full-wave bridge rectifier, AC or DC can be entered, and the input regardless of positive and negative electrodes. Filtering using two large-capacity electrolytic capacitors 35V 220UF do buffer filt..
₹113 ₹138
Brand: FlyRobo
Model: FR-07-014
This is an LM2596 DC-DC step-down converter with the high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with an Arduino nano, Arduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater t..
₹41 ₹75
Brand: FlyRobo
Model: FR-05-335
The LM2596 DC Buck Step Down Power Converter Module is a compact and efficient solution for converting higher voltage DC power sources to lower voltage outputs. With its versatile design, it can handle input voltages ranging from 3V to 40V, making it suitable for a wide range of applications. Its ad..
₹118 ₹169
Brand: FlyRobo
Model: FR-01-146
Matrix Nand Programmer MTX SPI NAND Flasher V1.0 features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX 360 models. It is also fully compatible with NAND PRO 2.0e and several other third-party programming tools.
Features:
..
₹649
Brand: FlyRobo
Model: FR-01-466
MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is an I2C controlled Digital-to-Analog converter (DAC). A very cost-efficient option of DAC allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. D..
₹163 ₹499
Brand: FlyRobo
Model: FR-01-465
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board is based on the ATmega2560 microcontroller. Built on the Atmel ATmega2560 microcontroller and 16 MHz high-quality quartz resonators are present on the board. The board uses the chip CH340G as the converter UART-USB. It provides a stable data ..
₹1,168 ₹1,534
Brand: FlyRobo
Model: FR-01-552
Micro SD Card Reader Module also called Micro SD Adaptor which is designed for dual I/O voltages. The Module is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Not only Arduino but can also be used with other microcontrollers.SD module h..
₹49 ₹78
Brand: FlyRobo
Model: FR-01-093
The Micro Switch D2FC-F-7N (10M) is here to meet all of your accurate and dependable performance needs. With its 10 million click lifespan, this micro switch was expertly engineered to ensure a seamless user experience.
It is the best option for situations where responsiveness and longevity are i..
₹8.70 ₹9
Brand: FlyRobo
Model: FR-01-421
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room.
Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart!
Simply sew on 4 L..
₹199
Brand: FlyRobo
Model: FR-05-989
This makes it suitable for different applications. With a maximum output current of 5A, it can easily handle demanding loads. Its step-down design helps with efficient power conversion, reducing wasted energy and heat dissipation.
The module comes with built-in regulation circuitry that guarantee..
₹59 ₹84
Brand: FlyRobo
Model: FR-01-221
MP2307 is a monolithic synchronous buck regulator. It integrates 100mΩ MOSFETS that provide 3A of continuous load current over a wide operating input voltage of 4.75V to 23V.
Features:
It has a wide 4.75V to 23V Operating Input Range.
Over-current protection
3A Continuous Output Current..
₹190 ₹269
Brand: FlyRobo
Model: FR-01-064
This is NE555 CD4017 5mm Red LED ICSK057A Electronic DIY Kit, mainly composed of the pulse generator and a decimal counter circuit. The pulse generator is made up of NE555 and peripheral components.
Features:
Power Supply: 4.5V-6V
It comes with all the components you need to assemble and..
₹116 ₹199