Compared to other versions of the Arduino using a separate USB-Serial converter chip, the Leonardo innovatively uses a single-chip solution. Only with an Atmega32u4 USB communication and control. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, el..
The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It co..
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB ..
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x) or ATmega168 (Arduino Nano 2.x). It has more or less the same functionality as the Arduino Duemilanove but in a different package. It lacks only a DC power jack and works with a Mini-B USB ..
The Arduino Uno R3 Compatible board is an electronic hardware device used to build and program electronic circuits and projects. The board is based on the ATmega328P microcontroller and is designed to be compatible with the Arduino Uno R3 board, which means that it can be programmed using the Arduin..
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It has..
Description:
The Arduino Uno is a micro controller board which is based on the ATmega328. Arduino Uno have 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header and a reset butto..
The Arduino Uno R3 Compatible Board is a microcontroller board which is based on the ATmega328. Arduino Uno has 14 digital input or output pins(where 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset bu..
This 3-cell Zop Power lipo battery with 2200mah of capacity and 35C of discharge rate comes with XT60 Connector. This lipo battery is compatible with all types of DIY drones or Multi-Rotor.
Features:
Battery parameter: Zop Power 11.1V 2200MAH 35C
Capacity: 2200mah
Continuous Discharge..
3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery also known as Lipo batteries are thin, light and powerful. This battery has a capacity of 500mAH. These Batteries are widely used in customize Power Supply, Bluetooth Speaker, IOT and other DIY and Industrial applications.
Feature and..
With this board, you can develop and prototype with any of Microchip's 40 pins AVR microcontrollers. The board has a User button and a status LED. The bridge rectifier allows this board to be powered with both AC and DC power supply adapters.
with this board, you can make any prototype that suppo..
With this board, you can develop and prototype with any of Microchip's 40 pins AVR microcontrollers. The board has a User button and a status LED. The bridge rectifier allows this board to be powered with DC power supply adapters.
with this board, you can make any prototype that supports 40 pins ..