12 V 4010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
12 V 6010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily c..
High Power DC Motor Speed Controller lets you control the speed of a DC motor using a Pulse Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. It can be used to drive all DC Brushed Motors that work between 12V-40V DC and consume up to 10A of current.
Features:
..
Introducing the eye-catching yellow-green screen variant of our 12864 LCD ABS Display! This small, bright display is made to be as visible and clear as possible in any setting. In addition to providing crisp graphics and legible text, the 128x64 pixel resolution of the ABS construction guarantees du..
The 12864B V2.0 is based on the ST7920 controller, which is commonly used for Arduino.
This display works on SPI. It is easy to use and compatible with the majority of microcontrollers out there. You can do a lot of graphics stuff with this display. You can create frames and even make small anima..
This is the 12 LED ring, a small chainable 85mm outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable. The driver chip is located inside the LED. Each Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requi..
If you need a way to sense the level of ambient light then there is no easier way to do it without an LDR/photo-resistor. The resistance of Light Sensitive Photoresistor LDR changes with the change in the ambient light exposure on the surface of the sensor. Light Dependent Resistor is a type of phot..
This is a 12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply, Be able to control various appliances and other equipment with a large current. It can be controlled directly by Micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic).
This is a 12V 16-Channel Relay i..
12V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 12V DC power supply which can be easily powered from the RPI board. It has a 2 pin connector to easily co..
Relay is an electromagnetic device that is used to isolate two circuits electrically and connect them magnetically. They are very useful devices and allow one circuit to switch to another one while they are completely separate. They are often used to interface an electronic circuit (working at a low..
This is 12V 8-Channel Infrared Remote Control Relay Module, associated with switching and isolating components, which makes interfacing with a microcontroller or sensor easy with minimum components and connections. The input ground is common to all eight channels.
Features:
Channel: 8 chann..
12V XH-M452 Temperature And Humidity Controller Module use an ST controller and a high-precision temperature sensor probe. It has a very High Accuracy Dual Output Automatic Constant Temperature And Humidity Control Board.
It can be embedded industrial equipment, convenient and fast. It can be use..