-61 %
Brand: FlyRobo
Model: FR-01-695
This 25mm Ultrasonic Humidifier Moisture Film Humidification Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. As sound waves contain compression and rarefaction. Due to extremely rapid movement, water droplets can no longer sustain their liquid state and..
₹58 ₹149
Brand: FlyRobo
Model: FR-01-047
This is 2CH RC Remote Control 27MHz Circuit PCB Transmitter and Receiver Board with Antenna Set. The two buttons on the launch board can control the voltage to be 1-3V and the motor is reversing.
Features:
Type: Two-way remote control
Antenna length: 26cm
To improve the remote control s..
₹299
-70 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-213
This is 2x40 Pin Male Berg Strip has a standard spacing of 2.54mm. It has two rows of 40 pins. These are best for the extension of pins of Microcontrollers and ICs.These connectors are breakable in length, because of the brittleness of the plastic material, with a one-time push you can break this co..
₹5.66 ₹19
-66 %
Brand: FlyRobo
Model: FR-01-359
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to mou..
₹30 ₹89
-52 %
Brand: FlyRobo
Model: FR-01-362
This is a Blue Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remo..
₹43 ₹89
-64 %
Brand: FlyRobo
Model: FR-01-364
This is a Golden Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just re..
₹32 ₹89
-61 %
Brand: FlyRobo
Model: FR-01-363
This is a Green Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. It has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
The heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just rem..
₹35 ₹89
-17 %
Brand: FlyRobo
Model: FR-01-269
3×1 Matrix Membrane Switch Keypad features a total of 3 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 4-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an..
₹74 ₹89
Brand: FlyRobo
Model: FR-01-004
This is a 3 pin JST XH Male connector. This connector connects wires to a board. It is a disconnectable connector in the crimp style. It is an entry-level model.
The wires must be crimped to the terminal before being inserted into the female connection and attached to any board's male connector. ..
₹1.50
-43 %
Brand: FlyRobo
Model: FR-01-117
3 Pin NTC Thermistor Module is a temperature sensor module that senses the temperature of the surrounding environment by the thermistor and converts it into a digital and analog output. The thermistor is the short form of thermal resistance and its resistance increases and decreases in the proportio..
₹27 ₹48
-28 %
Out Of Stock
Brand: FlyRobo
Model: FR-05-998
The 3.5-inch TFT LCD Touch Screen Arduino UNO Shield offers a compact and versatile solution for integrating a touchscreen display with an Arduino UNO board. With its vibrant 320x480 resolution display, it enables intuitive interaction with your Arduino projects. The shield seamlessly connects to th..
₹1,049 ₹1,449
-26 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-899
This small 3.5-inch touch screen Raspberry Pi Display module is designed especially for Raspberry Pi, using the latest Linux Core system. This is ideal for DIY anywhere, anytime, and does not require any separate power source or case to hold it. The module sits right on top of Pi and an ideal altern..
₹1,114 ₹1,499
