Brand: FlyRobo
Model: FR-01-729
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
₹65 ₹129
Brand: FlyRobo
Model: FR-04-640
Discover the power and versatility of the ESP32 with this compact development board. ? Featuring the reliable CH340 USB-to-serial chip and a modern USB Type-C connector, this board is perfect for a wide range of IoT projects. It combines Wi-Fi and Bluetooth capabilities, making it an ideal choice fo..
₹349
Brand: FlyRobo
Model: FR-01-538
ESP-01 8266 is a WiFi module, which means it can connect to a WiFi network to send and receive data. It is also a basic part of IoT, which is lower in cost than other development boards and modules. The module is easy to use with Arduino and other controllers can run with the available libraries. Th..
₹94 ₹109
Brand: FlyRobo
Model: FR-01-710
The A3144 Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH. If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time th..
₹29 ₹79
Brand: FlyRobo
Model: FRM-01-626
IIC/I2C 1602 Yellow-Green Backlight LCD Display Module For Arduino
Parameter:
Power supply voltage: +5 v
Support the I2C
With the Blue backlight, and contrast to adjust potentiometer
Four line output more simpler
Package included:
1 x LCD Display Module with Backlight
..
₹264 ₹379
Brand: FlyRobo
Model: C-1712
Laser Diode Modules are used in a variety of applications that require small sizes in addition to low power consumption with long operating lifetimes. Laser Diode Module is a breadboard friendly, low cost having a wavelength of 650nm, and operating voltage of 5V. The laser head is composed of a lig..
₹31 ₹89
Brand: FlyRobo
Model: F-1701
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down.
The X and Y axes are two 10k potentiometers that control 2D movement by generating analo..
₹32 ₹89
Brand: FlyRobo
Model: D-1708
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do..
₹25 ₹89
Brand: FlyRobo
Model: C-1704
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module co..
₹23 ₹69
Brand: FlyRobo
Model: FR-01-618
The 4 Channel Wireless Four Button Remote Control Transmitter Receiver Module with Non-Locking mode can be composed of a fixed code four radio receiver circuits, remote control of four four-bit data output code corresponding to the module, you can easily make up a wireless remote control receiver ci..
₹199 ₹289
Brand: FlyRobo
Model: FR-04-534
This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
This current clamp can be used to detect a current of up to 30A. Simply clip i..
₹378 ₹479
Brand: FlyRobo
Model: FR-01-361
This is an Aluminum Heatsink used for cooling the chips on Raspberry Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium...
₹9.06 ₹19
