This is 5V 8-Channel Infrared Remote Control Relay Module, associated with switching and isolating components, which makes interfacing with a microcontroller or sensor easy with minimum components and connections. The input ground is common to all eight channels.
Features:
Channel: 8 channe..
It is an 8 Channel Isolated 5V 10A Relay Module, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc. It is also able to control various appliances and other types of equipment with a large current. Relay output maximum contact is AC250V 10A ..
5V Active Electromagnetic Buzzer is a PCB mountable buzzer that can be easily soldered to a PCB board. Most commonly used at 5V. Long life, stable performance, High Quality with SOT plastic package.
Features:
Operates on 5V supply,
High Quality with SOT plastic package
Great to add Aud..
5V Pro Micro 16M Mini Leonardo Microcontroller Development Board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you of a lot of other Arduino compatible boards that you like.
The Micro ..
5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P.
5V Step-Up Lipo/Lion Battery Charging Board is mostly used in batteries for boosting, lithium battery charging,under-voltage protection, output short circuit protection, cellphone charge identifying cir..
This 5V Ultrasonic Humidifiers Power Circuit Board for Moisture Film Humidification atomization machine is; suitable for the atomization plate tablet with a diameter of 20mm. Just provide the DC3-12V power supply it will turn into a mini ultrasonic atomizer.
This Ultrasonic Humidifier Piezoelectr..
5v-12v Mini ZVS Induction Heating Power Supply Module is a high-quality module board for induction heating power supply.
Features:
The DC power supply voltage is 5V to 12V.
Easy Installation
Maximum power 120W(12V induction heating).
Plug and Play operation
Specifications:
..
5V 4010 Cooling Fan is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. it's also compatible with raspberry pi.
The cooling fan operate..
Features:
Polycrystalline silicon, with higher transfer efficiency output and environment-friendly
Suitable for charging a cellphone or DIY charger
Size: 270 x 180 x 2mm
Power: 5W
Voltage: 5-7V
Type: Other Camping Gear
Color: Black
Package Includes:
1 x 5W 5V Solar Panel...
Features:
CP2102 core chip: CP2102 USB to serial chip in the best quality, most stable, far more than the performance of cheap similar chips, such as PL2303, FT232, CH341,and so on. High-speed, reliable, stable is the CP2102 to USB-to-serial module in the leading sales of important reasons.
..
6050 Electret Condenser Mini Microphone with Wire is able to provide high-quality audio. The condenser microphone uses a capacitance that varies in line with the incoming signal to generate the varying output voltage.
Features:
Size: 6x5 mm
Communication: Wired
Package Includes:
1..
This is 60Bit WS2812 5050 RGB LED Built-in Full-Color Driving Lights Development Board. At the bottom of the PCB are solder pads for soldering wires. This ring consists of a set of four pieces that need to be soldered together to form a ring.
Features:
IC Chip: WS2812B
No of Light: 60
..