Brand: FlyRobo
Model: FR-01-420
The ATtiny85 based mini development board is similar to the Arduino but cheaper and smaller. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this ATTINY85 USB Development Board is a great way to jump into microcontroller electronics.
ATtin..
₹287 ₹599
Brand: FlyRobo
Model: FR-01-474
AVR ATmega16 Minimum System Development Board Module you can directly connect your DIP package ATmega16 IC without the need for soldering in your DIY circuits. It has an external power supply module to power up the MCU via a DC-005 barrel jack connector.
It also has two onboard LEDs one for pow..
₹250 ₹289
Brand: FlyRobo
Model: FR-01-633
This is AVR ISP 10 Pin to 6 Pin Adapter Board USBASP STK500. The standard 10PIN programmer can be used to interface to the standard 6PIN Interface Converter. AVR MCU development board can be used to download Interface Converter and also an Arduino development board can be used for the ISP interface ..
₹23 ₹200
Brand: FlyRobo
Model: FR-01-103
B103 10K Dual Channel Straight Sliding Potentiometer whose resistance can be varied by moving the handle linearly from one end to another. It is a 10K Linear Potentiometer, which means when the handle is at one end the resistance is 0 ohms. Moving the handle towards the other end will change the res..
₹47 ₹189
Brand: FlyRobo
Model: FR-06-199
M3 tie rod ends are made for remote-control models including RC boats, helicopters, and robots. It is a DIY spare component that is required. It is constructed of stainless steel and an aluminum alloy, making it sturdy and long-lasting.
Features:-
Materials: stainless steel and aluminum all..
₹175 ₹299
Brand: FlyRobo
Model: FR-01-275
BF350 High Precision Resistance Strain Gauge Pressure Sensor is a foil metal strain gauge. BF350 is mainly fit for 0.02 level manufacturing crafts pressure sensor which means its output deviation should be controlled within 0.02 so its precision is really high.
Features:
Automatic creep and..
₹17 ₹39
Brand: FlyRobo
Model: FR-01-698
BH1417 PLL FM Transmitter includes features like pre-emphasis, sound limiter, stereo transmission, low pass filter, PLL circuit, FM oscillator, and rf output buffer.
The sound limiter maintains the same audio level so no distortions occur, the stereo encoder separates the left and right channel e..
₹1,104 ₹1,499
Brand: FlyRobo
Model: FR-01-160
iBeacon BLE Module is for Apple iOS 7.0 or Android 4.3+, Bluetooth 4.0+. It supports Near-field Positioning Sensor Wireless Acquisition.
Features:
BT version: Bluetooth Specification V4.0 BLE
Modulation method: GFSK(Gaussian Frequency Shift Keying)
RF Power : -23dbm, -6dbm, 0dbm, 6dbm, ..
₹999
Brand: FlyRobo
Model: FR-07-550
On-Board Diagnostics, or OBD, in an automotive context, is a generic term referring to a vehicle’s self-diagnostic and reporting capability. OBD systems give the vehicle owner or a repair technician access to the state of health information for various vehicle sub-systems. ELM327 Bluetooth CAN-BUS s..
₹382 ₹439
Brand: FlyRobo
Model: FR-01-263
Bluetooth Serial Transceiver Module Base Board can install Bluetooth modules, such as HC05, HC06, HC07, BC04, or other compatible Bluetooth modules.
Features:
Input voltage 3.6V to 6V, must not exceed 7V
The pin-outs include TXD, RXD, STATE ( if any ), KEY ( if any ) common pin
Compatib..
₹43 ₹99
Brand: FlyRobo
Model: FR-05-979
The BME280 is an environmental sensor designed for mobile applications with low power consumption and size constraints.
Features :
BME280, which is the precision sensor, is soldered onto the PCB.
You can access a sufficient amount of weather data by connecting it through I2C, which will h..
₹235 ₹379
Brand: FlyRobo
Model: FR-01-129
BMP180 Digital Barometric Pressure Sensor Shield for the D1 Mini allows for precise measurement of atmospheric pressure and temperature and can be connected over WiFi. It is combined with a D1 Mini ESP8266 board, this information can be communicated via the internet and be used to control a system.
..
₹81 ₹189