The HY-SRF05 Ultrasonic Ranging Sensor is a high-precision distance measurement module that uses ultrasonic waves to detect objects and measure distances. It features a wide range of detection from 2cm to 450cm, making it ideal for various applications, including robotics, obstacle avoidance, and ob..
HZ-1050 RFID Module Consists of a very easy RFID reader module to use and one RFID keyholder. The reader module works on 125 kHz frequency. The communications data rate is able to be set on 9600 and 19200 baud. There is a connector on the PCB and this allows it to be connected easily. The output is ..
The I2C ADS1115 16-Bit ADC Module 4 Channel is Your Key to Precision Data Acquisition, and it is available now.
With our ADS1115 ADC Module, you may achieve data measurement projects with unmatched accuracy and adaptability. This 16-bit Analog-to-Digital Converter (ADC) is small, strong, and made..
The four spindles on the ICSH044A Blackberry Trackball Breakout Board 360 Degree Trajectory Ball Module Hall Effect Sensor have a tiny circular magnet in the end; each of these is paired with an SMD hall effect sensor, which is used to measure up, down, left, and right movements of the trackball.
..
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.
Specifications and Fea..
This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
Feature and Specification:
EYE BLINK indication by LED
Instant output digital signal for directly Connec..
The Infrared IR Wireless Remote Control Module Kit for Arduino consists of ultra-thin infrared remote control and 38KHz infrared receiver module. This mini slim infrared remote control with 20 function keys. Its transmit distances up to 8 meters. Ideal for handling a variety of equipment indoors.
..
Infrared Obstacle Avoidance Sensor Module is very easy to interface directly with Arduino or other micro-controllers. It also works with the Raspberry Pi with a voltage range of 3-6 volts. It is assembled module with 4 pins. It has an onboard status LED.
Feature:
Four pins: +5-volts, GND, ..
INMP441 MEMS High Precision Omnidirectional Microphone Module has a high signal-to-noise ratio, suitable for near-field applications. It has an I2S interface that allows the INMP441 to be directly connected to digital processors such as DSPs and microcontrollers without the need for an audio codec f..
NodeMCU ESP-8266 WIFI Board CP2102. The Development Kit based on ESP8266 integrates GPIO, PWM, IIC, 1-Wire, and ADC all in one board. Power your development in the fastest way combines with NodeMCU Firmware! R2 version had CP2102 USB-TTL instead, larger current support, the slim board can put on a b..
IP5328P Boost Charging Bidirectional Fast Charging Mobile Power can support a total charging port 4: 2 USB-A output interface, a USB-C interface, Micro USB interface, four interfaces supports fast-charge, wherein two support USB-A port QC3.0, FCP, AFC, MTK, SFCP fast charge output power of up to 18W..
IPEX to SMA Female External Adapter + SMA Male Antenna for 2.4G WIFI Module can be used for a wide array of wireless applications like point-to-point or point-to-multipoint architecture. The broadband characteristics of the antenna enable it to operate over a very wide frequency range with consisten..