MAX98357 I2S 3W CLASS D Audio Amplifier Module accepts digital audio through the I2S interface and converts it to an analog output signal and amplifies it to allow direct speaker connection. It combines an I2S D/A converter with an audio amplifier on one board.
MAX98357 I2S 3W CLASS D Audio Ampli..
An MB102 830 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connection..
Features:
1. Place it directly on a breadboard with red and blue lines.
2. With DC-005 round hole plug input, input voltage 6.5-12v, compatible with most power adapters.
3. With USB input, it can be directly connected to computer USB or 5V power supply.
4. With Micro USB input, most mobi..
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System produces the signal when moved away from each other which can be fed to the microcontroller to perform the desired action as per requirement. It is used as a door or window security alarm.
It is trigger by the magnet. When the magne..
MCP23017 is a high-speed IIC interface. It supports the IIC frequency of 100KHz, 400KHz, and 1.7MHz. The chip has 3 address pins, which can set up to 8 different addresses. So 8 modules can be connected through two IIC buses to achieve up to 128 IO extensions.
This module is flexible in configura..
This is MCP2515 CAN Bus Module with TJA1050 Transreceiver which can adopt CAN controller MCP2515 and TJA1050 high-speed CAN transceiver. Onboard independent key. Microchip MCP2515 independent CAN protocol controller, support CAN V2.0B regulation.
This is easy to use CAN bus module controlled via..
The MCP30083008 devices are successive approximation ID-bit Analog-to-Digital (AID) converters With onboard samples and hold circuitry. The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity ..
MCP4725 is an I2C controlled Digital-to-Analog converter (DAC) that allows you to send an analog signal. This version of the MCP4725 Breakout fixes a few issues with the board
including the IC footprint, the I2C pinout, changes the overall board dimensions to better fit your projects and a few more..
MCP4725 I2C DAC Breakout Development Board Module has MCP4725 which is an I2C controlled Digital-to-Analog converter (DAC). A very cost-efficient option of DAC allows you to send an analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. D..
MCU-103 Rotation Angle Sensor has a dustproof design that protects the interior from dust, which maintains stable performance. It is compatible with high peak lead-free soldering. temperatures.
Features:
Excellent resistance materials and high-reliability wiper achieves 1 M cycles
D forma..
The MCP23017 consists of multiple 8-bit configurations for input, output, and polarity selection. It provides a 16-bit general-purpose parallel I/O expansion for the IIC bus.
Features:
High-Speed SPI InterfaceConfigurable Interrupt Source
External Reset Input
Configurable as active-high..
OPT3001 chip is used to measure the intensity of light as visible to the human eye. The precision spectral response and strong IR rejection of the device enable the OPT3001 to accurately meter the intensity of light as seen by the human eye regardless of the light source.
Features:
Model:..