Brand: FlyRobo
Model: FR-01-052
This is WXD3-13-2W 4.7K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-1..
₹122 ₹199
Brand: FlyRobo
Model: FR-01-249
WZ3605E 80W 5A Adjustable Buck Boost Power Supply Module is a high-definition color screen display that is clear and intuitive, using a 1.44-inch high-definition color screen LCD display, and the content is displayed on multiple screens. The output voltage is adjustable from 0.6-36.00V, and the outp..
₹1,929 ₹3,999
Brand: FlyRobo
Model: FR-01-115
X9C103S DC 3-5V Digital Potentiometer Board Module for Arduino consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. These are digitally controlled (XDCP) potentiometers.
The potentiometer is implemen..
₹191 ₹229
Brand: FlyRobo
Model: FR-01-974
The X9C104 digital potentiometer module helps you simulate the mechanical control of a potentiometer. The integrated circuit contains 99 series-related resistors. With a microcontroller, you can control the module and select the place where the center pin of the "potentiometer" is connected, anywher..
₹399
Brand: FlyRobo
Model: FR-01-454
The XBee Shield V03 Module allows wireless communication between Arduino over a modified ZigBee protocol using Xbee Module. The shield is ready to use, plug n play, without the Xbee Module. The shield can be directly put on top of Arduino Uno. It works with all Xbee Module i.e. Series 1 and Series 2..
₹165 ₹349
Brand: FlyRobo
Model: FR-01-469
This is a simple to use, RS232 to the serial base unit for the XBee line of products. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach an RS232 cable, attach a USB cable to power the board and you will..
₹117 ₹349
Brand: FlyRobo
Model: FR-01-446
XBee Sensor Expansion Shield V5 with RS485 and BLUEBEE Bluetooth Interface for Arduino provides a number of interfaces that are commonly used, it includes Bluetooth, SD cards, APC communication, and RS485. Also, standard UART and 12C are also made easy to access. It is designed for easy connecting o..
₹269 ₹489
Model: FR-01-482
This is the XBee Pro S2B module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication betwee..
₹1,947 ₹3,500
Model: FR-01-475
XBee S2C is an RF module designed for wireless communication or data exchange and it works on ZigBee mesh communication protocols that sit on top of IEEE 802.15.4 PHY. The module provides wireless connectivity to end-point devices in any ZigBee mesh networks including devices from other vendors. Ple..
₹2,222 ₹3,500
Brand: FlyRobo
Model: FR-01-013
XH-A232 30W + 30W TPA3110 Digital Stereo Audio Power Amplifier is a newly designed digital audio amplifier board with a dual-channel and also has a good performance. It features a high-efficiency class D audio power amplifier with the latest and original TPA3110 core technology the BTL bridge circui..
₹189 ₹325
Brand: FlyRobo
Model: FR-01-131
XH-A232 TPA3110 Dual Channel Digital Power Amplifier Board is a newly designed digital audio amplifier board with a dual-channel and also has a good performance. It features a high-efficiency class D audio power amplifier with the latest and original TPA3110 core technology the BTL bridge circuit is..
₹168 ₹248
Brand: FlyRobo
Model: FR-01-041
XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board which works in conventional class (class AB and Class D).
Features:
Model: XH-M125
Power: stereo mono 5W
Low power consumption
Package Includes:
1 x XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board...
₹64