This is PL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin. Adopt imported controller RS232 TTL, which can stabilize the flash with high-speed 500mA self-recovery fuse for protection.
Two data transmission indicator can monitor data transfer status in real-time. Reserve 3.3V and 5V pin i..
The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four-wire – red power, black ground, white RX into the USB port, and green TX out of the US..
This is Plant Watering Alarm Alerter Humidity Moisture Sensor. It is inserted into the ground close to a plant, and when the soil is dry, it makes a tiny chirp to signal you to water the plant. It uses capacitive humidity sensing as opposed to resistive humidity sensing.
The alarm level can be se..
The PLCC32 to DIP adapter board is an effective and low-cost board for PLCC32 to DIP conversion. You just have to plug a PIC into this adapter. After the programming process is finished, you can remove it from the adapter.
Features:
High-quality and durable
Chip Encapsulation: PLCC32
PL..
The PLCC44 to DIP adapter board is an effective and low-cost board for PLCC44 to DIP conversion. You just have to plug a PIC into this adapter. After the programming process is finished, you can remove it from the adapter.
Features:
High quality and durable
PLCC44 to DIP 40 chip conversio..
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds..
PT100 Temperature Sensor Probe 3 Wire is a waterproof design that can be used directly in the water.
Features:
Type: PT100
Terminal: 3 Insulated Forks
Three terminals for easy connection.
It is widely used for industrial or laboratory testing equipment temperatures.
Package Inclu..
The PT100-S Waterproof 1m 30mm Probe PTFE FTARP05 Stainless Steel Pole Probe Temperature Sensor has a water-immersible probe suitable for precision air or liquid temperature measurements. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance ..
Heart Rate data can be used in many Electronic design and microcontroller projects. But the heart rate data is difficult to read, however, the Pulse Sensor helps us to read heart rate. The Pulse Sensor is a plug-and-play heart-rate sensor for Arduino. It essentially combines a simple optical heart r..
This is a Pure Sine Wave Inverter Driver Board EGS002 LCD Display Screen. It is compatible with the EGS002 wave inverter driver board. A shielding cable is required for connecting the EGS002 driver board and LCD.
Features:
Type: LCD Display Screen.
Applications:
Single-phase pure sine..
The DC12V PWM DC Fan Speed Controller is a versatile device designed for controlling the speed of DC fans. Operating on a 12V power supply, this controller utilizes Pulse Width Modulation (PWM) to regulate fan speed. It includes a temperature probe for monitoring, and it can trigger a high-temperatu..
2 channel PWM/Pulse generator with variable Frequency from1hz to 150Khz and Duty cycle 1% to 100% alterations. The frequency and duty cycle can be controlled using switches provided on board.
It gives an easy solution for driving stepper motors using variable frequency pulse input and DC motor wi..