The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Disp..
The TM1638 Button Digital LED Display Module is used in chip TM1638, a collection of these three common MCU peripheral circuit, the biggest feature just takes three microcontroller IO port to drive, do not need to scan display and key scanning microcontroller intervention, only need to read the rele..
The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy s..
Temperature sensors effectively transmit the electrical signals into data that can be used for any application.
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any e..
The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat ..
TowerPro Servo Motors are high-performance, reasonably priced servos. They may be used for many different things, such as RC cars, aeroplanes, and robots. They can also be used for fun with whatever wacky project you're working on.
Features:-
Type of Gear: Metal Gear
JR Servo Plug (Fits ..
This TPA3118 PBTL 12V 24V Power Mono Digital Amplifier Module comes with very good sound quality. The module equips a Mono digital audio power amplifier chip. A large area of copper and dense vias hole enhances heat dissipation. it has current limiting, short circuit, and over-temperature protection..
This is Clear Plastic Case for Arduino UNO R3. The case is a two-piece injection-molded enclosure that holds together around the Arduino and it holds the Arduino firmly in place. As it is transparent is perfect for letting you see your Arduino Uno and make any needed adjustments easily.
Features:..
This is Clear Plastic Case for Raspberry Pi 3 Model B. The case is a two-piece injection-molded enclosure that holds together around the Raspberry Pi and it holds the Raspberry Pi 3 firmly in place. As it is transparent is perfect for letting you see your Raspberry Pi 3 Model B and make any needed ..
TRRS connectors are the audio-style connectors that you see on some phones, MP3 players, and development boards.
TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extr..
The TSL235R light-to-frequency converter outputs a square wave (50% duty cycle) with frequency directly proportional to light intensity (irradiance). The device has been temperature compensated for the ultraviolet-to-visible light range of 320 nm to 700 nm and responds over the light range of 320 nm..