TTP223B Capacitive Touch Key Sensor Module is based on a touch-sensing IC capacitive touch switch module. It allows you to remove the worry of conventional push-type keys.
Digital Capacitive Touch Switch Module is based on TTP223B. Normally, it outputs low and keeps at a low power state. When a t..
The 4 Channel Capacitive Touch Sensor Module uses the touch-sensing IC TTP224 to sense the touch input thus making it easy to add capacitive touch input to your project. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. The module has 4 to..
The TTP226 is a touchpad detector IC which offers 8 touch key. The touching detection IC is designed for replacing the traditional direct button key with a diverse pad size. Capacitive touch allows electronics to sense when your finger is within a few millimeters of a surface to simulate a button “p..
This is TTP229 16-Way Capacitive Touch Switch Digital Touch Sensor Keypad Module. This capacitive touch sensor module uses the TTP229 integrated circuit, making it easy to add capacitive touch input to your project. It features 16 sensitive touchpads that make an ideal replacement for the old fashio..
This Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm Normally Open switch LJ12A3-4-Z/BX is a component widely used in the automatic control industry for detecting, controlling, and non-contact switching. When the proximity switch is close to some target object, it will send out..
The automatic control industry uses this DC 6-36V M12 Inductive 4mm PNP-NO Proximity Sensor Switch extensively for detecting, regulating, and non-contact switching. The proximity switch will emit a control signal when it is in close proximity to a target object.An Edy Current is induced in metal as ..
TXB0104 Board is a 4-bit bidirectional voltage-level translator with automatic direction sensing. It features four channels of input/output signals and an output enable line that allows the signal lines to be placed in a high impedance mode when they are unneeded.
Features:
4-Bit Bidirecti..
TXS0108E 8 Channel Bi-Directional Logic Level Converter Module is a small device to convert the 1.8V 3.3V 5V logic level mutually enable you to successfully set your high and low voltages and step up and down between them safely on the same channel. It is a high-speed full-duplex 8 channel logic lev..
This is a GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 2.5 x 2.5 cm active GPS antenna with a UART TTL socket.
UBLOX NEO-6M GPS Module has a battery for power backup ..
UDA1334A I2S DAC Stereo Decoder Module has an I2S-output audio interface. The DAC will process data immediately and give you a clear, analog, stereo-line-level output.
Features:
3.3V - 5V logic levels
A built-in PLL will generate the proper clock from the incoming signal.
It has a I2S..
UHF RFID library tag is specially designed for the management of books and important confidential documents. It is not only a double-side adhesive with high performance, but also uneasy to be discovered.
The tag also has a “multi-read” function, which means that several tags can be read at once. ..
ULINK2 Debug Adapter connects your PC's USB port to your target system (via JTAG, SWD, or OCDS) and allows you to program and debug embedded programs on target hardware. The software used on the PC will be Keil-MDK.
Features:
Supports various ARM7, ARM9, Cortex-M, 8051, and C166 device..