This is a USB 3.1 Type-C 24pin Male Adapter Board, that supports the latest computer/Tablet/Mobile Phone/Hard Disk Drive devices with Type C for charging and data transfer. It has a USB C Male Socket connector mounted on the DUAL side PCB board with all 24 pins broken out to solder point with 12 pin..
This is a USB 3.1 Type-C Female Socket with Board, that supports the latest computer/Tablet/Mobile Phone/Hard Disk Drive devices with Type C for charging and data transfer.
Features:
Type: Female
V: Positive power supply
D -:Data negative
D+:Data positive
G: Negative power supply
..
USB Adapter Board is a simple interface converter. It includes a 4P terminal, Micro USB female, Types A USB male, and Type A USB female. It can achieve mutual conversion between these four interfaces. It can be used as a voltage interface converter or as a data interface converter.
Features:
..
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. USB ASP AVR Programming Device for ATMEL Processsors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no s..
The USB-Blaster drives configuration or programming data from the PC to configure or program Altera devices.
ALTERA USB Blaster Support AS, PS, and JTAG program, Support embedded logic analyzer function of SignalTapII and NIOS II communication and debugger — When you use it to debug your Black Go..
The Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm Connects speed-critical devices, such as external hard drives and smartphones, and peripherals that require a Mini-B connection to your computer.
Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity a..
USB A to B Cable for Arduino UNO and MEGA Boards. It is also called a printer cable that is used in printers. These cables are used to connect our Arduino UNO or Arduino MEGA Boards to flash our code.
Features:
Type: USB Type-A to Type-B Connector
Length of cable: 30cm
Fully compatible ..
USB A to B Cable for Arduino UNO and MEGA Boards, also known as a printer cable used in printers. These cables are utilized to connect Arduino UNO or Arduino MEGA Boards for flashing our code.With its sturdy construction and reliable connection, this cable ensures seamless communication between your..
USB Charger Doctor to measure the working voltage and current output for any USB port and project. This blue plastic dongle plugs between a USB device and passes the data lines through. There’s a 0.05-ohm resistor in line with the power pin that is used to measure the current draw.
The Doctor’s d..
USB Charging Discharge Resistance Current Detection Load Tester can easily test the mobile power charging treasure, cell phone charger, USB power output current is standard, as long as the resistance USB port to the above line.
And can carry on an aging test to mobile power and USB power adapter..
Fixed 5V Output Boost Regulator (step-up regulator) Module with standard USB Connector.
Accepts Input voltage from 0.9V to up to 5V.
Features:
On-board CE8301 Chip
Input voltage: 0.9V-5V DC
PFM Control DC-DC Converter
Transfer efficiency: 96%(max)
With USB port
With worki..
The best option for smooth power connectivity is here: the USB DC5.5 x 2.1mm Wire Connector DC Plug Power Cable. This thin, flexible cable is made to connect USB devices to DC 5.5 x 2.1 mm power ports with ease.
For a variety of applications, our USB DC5.5 x 2.1mm Wire Connector DC Plug Power cor..