Brand: FlyRobo
Model: FR-01-008
18650 5V 2.4A Lithium Battery Digital Display Charging Module is equipped with Dual USB output to charge the tool at 2.1A and 1A. The Module has two USB inputs one is C-type input, and the other is a Micro USB input.
Features:
It is designed with a display screen, you can know the chargin..
₹249
-35 %
Brand: FlyRobo
Model: FR-01-212
This is an 18mm x 13mm x 6mm (LxWxH) Aluminum Heatsink which can be used for multipurpose applications. The aluminum heat sink reduces the risk of hardware failure because of overheating.
Features:
It absorbs heat quickly.
This heatsink with Thermal conductive double-sided tape, which is ..
₹45 ₹69
Brand: FlyRobo
Model: FR-01-251
1Hz-50MHz Crystal Oscillator Frequency Counter Meter DIY Kit is a frequency meter based on PIC single chip microcomputer, with a crystal vibration measurement function and programmable frequency setting of addition and subtraction, five digits tube display, convenient and intuitive, all use in-line ..
₹569
-56 %
Brand: FlyRobo
Model: FR-01-587
This Load Cell Weight Sensor can translate up to 1kg of pressure (force) into an electrical signal. Each load cell is capable of measuring the electrical resistance that changes in response to, and proportionality of, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will ..
₹126 ₹289
-42 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-371
Features:-
2 Gl High performance and stability, ability to work fluidly
High quality for usage by professionals
Nice accessories to update your remote-controlled boat and significantly raise its performance
It is a great replacement for a damaged or outdated one thanks to its reasonable ..
₹329 ₹569
-21 %
Brand: FlyRobo
Model: FR-01-268
2×1 Matrix Membrane Switch Keypad features a total of 2 buttons in Matrix form. This is a membrane keypad with no moving parts. A female 3-pin berg connector is required for interfacing it with your microcontroller circuits. A simple way to mount the keypad in a variety of applications, as it has an..
₹63 ₹79
-60 %
Brand: FlyRobo
Model: FR-01-309
Flex Cable for Raspberry PI Camera is a replacement for the original Raspberry Pi Camera Cable or 15P CSI Cable. It comes with connectors on both ends and works with Raspberry Pi 3, 4, and other models with 15P CSI Connectors.
Features:
Easy to use.
Easily replaceable.
Applications: Di..
₹158 ₹399
Brand: FlyRobo
Model: FR-01-003
JST-XH Male 2 Pin Connector Electrical connectors with a 2.54mm pitch are used in rechargeable battery packs, radio-controlled servos, battery balancers, and other devices. The connector features terminals that are nickel-plated and are composed of high-quality plastic.
Features:-
AC power ..
₹1
-33 %
Brand: FlyRobo
Model: FR-01-071
The projects that require greater battery backup and the powering of several sensors and actuators that operate at various voltages are best suited for this 2 x 18650 Lithium Battery Shield module. It has a full-size USB connector as Output and a micro USB, USB type C connector to charge the 18650 c..
₹358 ₹539
-40 %
Out Of Stock
Brand: FlyRobo
Model: FR-01-240
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Three-Color Display: Black, White, Red
MH-ET Live: Waveshare 3 color display equivalent
Low Power Consumption
It ..
₹1,269 ₹2,100
-43 %
Brand: FlyRobo
Model: FR-01-241
2.13 Inch E-Paper Flexible Ink Screen LCD Module is suitable for Ardunio/STM32. It uses the "microcapsule electrophoresis display" technology for image display.
Features:
Two-Color Display: Black and White
Low Power Consumption
It has a wide viewing angle
Used for display of electron..
₹1,201 ₹2,100
-70 %
Brand: FlyRobo
Model: FR-01-998
2.4G wifi receiver antenna Bluetooth remote control antenna built-in gold-plated.
Features:
Name: Receiver antenna
Frequency:2.4G
used for: receiver/Monitoring antenna/Bluetooth antenna
Connector type: IPX13
Material: RF113 Silver line
Length:13cm
Package Includes:
1 x 2.4..
₹15 ₹49
