Features:-
Safe and effective work are ensured by good heat dissipation performance.
It is crafted using fine materials and great craftsmanship, making it sturdy for prolonged usage.
It can effectively prevent the engine from overheating thanks to its superior heat dissipation function.
..
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to moun..
Flex Cable will let you swap out the stock 500mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Features:
Easy to use.
Easily replaceable.
Applications:
Displays, PC and Computers, ..
OV5647 Wide Angle Fish-Eye Lens Night Vision Camera for Raspberry Pi is a 5MP Night vision camera module. This is a 130° fish-eye wide-angle camera for Raspberry pi 2 Raspberry pi 3B and 3B+.
Features:
The Raspberry Pi Camera Board features a 5 megapixels
Compatible with Raspberry Pi 2, ..
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.
The board itself is tiny, ..
5V 3007 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 5V DC power supply which can be easily powered from the RPI board. It has a 2 pin JST connector to easily ..
5V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. This fan can be directly connected to Raspberry Pi pins 4 and 6.
The cooling fan operates on a 5V DC power supply which can be easil..
5V 4010 Cooling Fan is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. it's also compatible with raspberry pi.
The cooling fan operate..
The 8MP Raspberry Pi Camera Module V2 has a Sony IMX219 8-megapixel sensor. This Camera Module can be used to take high-definition video, as well as stills photographs. It is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Raspberry Pi Camera..
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.
Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the desig..
This is an Aluminum Heatsink used for cooling the chips on Raspberry Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium...