Brand: FlyRobo
Model: FR-05-652
The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection terminal to terminal (serial-port connection terminals, including GND).
The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between..
₹58
Brand: FlyRobo
Model: FR-05-656
Feature:-
Direct Digital Conversion of Type -K Thermocouple Output
Cold-Junction Compensation
Simple SPI-Compatible Serial Interface
12-Bit, 0.25°C Resolution
Open Thermocouple Detection
Package Includes:-
1 x MAX6675ISA IC SOP8..
₹293
Brand: FlyRobo
Model: FR-05-655
The MAX7219CNG is a compact, serial input/output common-cathode display driver that can interface microprocessors to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit dri..
₹130 ₹250
Brand: FlyRobo
Model: FR-05-662
The MCP3008-I/SL is an 8 channel, 10bit Analogue to Digital (ADC) Converter with SPI interface in 16 pins SOIC package. This ADC combines high performance and low power consumption in a small package by making it as an ideal for embedded control applications. The MCP3008 features successive approxim..
₹293
Brand: FlyRobo
Model: FR-01-971
The MCP30083008 devices are successive approximation ID-bit Analog-to-Digital (AID) converters With onboard samples and hold circuitry. The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity ..
₹249
Brand: FlyRobo
Model: FR-05-663
The MCP602-I/SN is a dual CMOS operational amplifier in 8 pin DIP ic package. This low power op amp utilizes an advanced CMOS technology that provides low bias current, high-speed operation, high open loop gain and rail to rail output swing. The common mode input voltage range goes 0.3V below g..
₹39
Brand: FlyRobo
Model: FR-05-649
Specifications
40-pin Low Power Microcontroller
Flash Program Memory: 8192 bytes
EEPROM Data Memory: 256 bytes
SRAM Data Memory: 368 bytes
I/O Pins: 33
Timers: Two 8-bit / One 16-bit
A/D Converter: 10-bit Eight Channel
PWM: Two 10-bit Modules
SSP: SPI and I²C Support
USART: Y..
₹149
Brand: FlyRobo
Model: FR-05-650
The PIC24FJ64GB002-I/SP is a 28-pin general-purpose Flash Microcontroller with USB On-The-Go (OTG) and nanoWatt XLP technology. The 16-bit low power microcontroller with full-speed USB, 64kB flash memory, 8kB RAM and advanced peripherals. The USB On-The-Go module provides on-chip functionality as a ..
₹249
Brand: FlyRobo
Model: FR-05-694
The IRFP064NPBF is an N-channel MOSFET in a TO-3P package, designed for high-power switching applications. It features low on-resistance (Rds On) for improved efficiency and reduced heat dissipation. With a maximum drain current of 110A and drain-to-source voltage of 55V, it is ideal for power suppl..
₹59
Brand: FlyRobo
Model: FR-05-618
This is a common 555 timer IC. A classic for all of those first-year circuits projects where you need to blink an LED, generate tone, and thousands of other great beginning projects. Google around for a huge list of resources and example projects.
specification:-
Package/Case ..
₹8
Brand: FlyRobo
Model: FR-07-009
PICKIT 3 In-Circuit Debugger/Programmer compatible to Microchip uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer.
The PICKIT3 allows debugging and programming of PIC and dsPIC Flash microcontrollers using the powe..
₹2,292 ₹2,899
Brand: FlyRobo
Model: FR-07-070
PICkit 3.5+ In-Circuit Debugger/Programmer compatible to Microchip uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer.
The PICkit3.5+ allows debugging and programming of PIC and dsPIC Flash microcontrollers using t..
₹2,425 ₹3,499