The Mounting L Bracket for NEMA17 Stepper Motor(Bend) is made from high-quality Hardened Mild Steel.
Mounting L clamp will fit any NEMA17 Motor (with 31 mm hole spacing) with four screws. L-shaped bracket with 90 degrees mounting angle, is designed for NEMA17 Stepper Motor to mount it on the app..
This servo tester or ESC Taster is offered 3 modes to check Servo or ESC, and other devices. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic ’’Window Wiper’’ Mode makes the servo..
The OT-FF N50WA Micro Motors is a high-precision, compact motor designed for various robotics, medical devices, and industrial automation applications. These motors feature a robust construction with high torque output and efficient power consumption.
Their low noise and vibration levels make the..
NEMA17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer. 1 Damper used per Stepper or Electric motor. 3D printers see a 5-10dB reduction in noise when used on X and Y-Axis steppers with the vibration damper for NEMA17.
Works on both Cartesian and Delta style Add..
The NEMA17 4.2 kg-cm Stepper Motor can provide 4.2 kg-cm of torque at 1.2A current per phase. The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control.
The motor’s position can be commanded to move or hold in o..
This NEMA17 42 Stepper Motor Cork Damper reduces the heat transfer from the hot running motor to the plastic frame parts. It can also reduce the transmission of vibration to the printer frame.
Features:
Type: NEMA 17 Stepper Damper
Material: Cork Sheet
It reduces the resonance of the mo..
The NEMA17 5.5 kg-cm Stepper Motor can provide 5.5 kg-cm of torque at 1.5A current per phase. The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control.
The motor’s position can be commanded to move or hold..
The NEMA23 10.1 kg-cm Stepper Motor can provide 10.1 kg-cm of torque at 2.8A current per phase. The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control.
The motor’s position can be commanded to move ..
PCA9685 is an I2C-controlled PWM driver with a built-in clock. It means that, unlike the TLC5940 family, you do not need to continuously send it to signal to tie up your microcontroller, it's completely free running! It is 5V compliant, which means you can control it from a 3.3V microcontroller and..
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a 14:1 gearhead which produces 350 RPM with the torque value of around 78 N-CM.
Features:
Rated Voltage: 12VDC
Rated Torque: 30 kg-cm
Rated Speed: 350 RPM
Body Diameter: 50 mm
Sha..
This is 12V DC motor which has a gearbox of 45mm diameter. The planetary type gearbox of this motor has a metal gears and a center shaft. The Shaft of the motor is loaded with bearing for wear resistance and smooth operation.
Features:
Rated Torque (kg-cm): 21
Stall Torque(kg-cm): 80
Ra..
The PWM DC 3A Motor Speed Controller Regulator is designed for precise control of DC motor speeds, supporting up to 3A of current. This compact module uses Pulse Width Modulation (PWM) technology to ensure efficient and smooth speed adjustments with minimal power loss. It features a built-in on/off ..