Brand: FlyRobo
Model: FR-01-815
Flex Sensor 4.5″ Bend Sensor for Hand Gesture Recognition is a simple resistive sensor that is 4.5″ in length yet a powerful sensor to sense flexibility. As the sensor is flexed, the resistance across the sensor increases. The resistance of the flex sensor changes when the metal pads are on the outs..
₹380 ₹1,126
Brand: FlyRobo
Model: FR-01-554
This is a small force sensitive resistor. It has a 0.16″ diameter active sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR, its resistance ..
₹448 ₹689
Brand: FlyRobo
Model: FR-01-558
This is a force sensitive resistor with a square, 1.75 x 1.5″, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larg..
₹309 ₹850
Brand: FlyRobo
Model: FR-07-501
The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor that has a flat response across most of the visible spectrum. Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the response of the human eye.
The TSL2561 is capable of direct ..
₹418
Brand: FlyRobo
Model: FR-01-809
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers – ideal for use with PCBs, breadboard, or stripboard.
Four whit..
₹349 ₹599
Brand: FlyRobo
Model: FR-01-813
HB100 Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, making it ideal for usage in motion detection equipment.
This module is ideal for alarms, motion detectors, lighti..
₹185 ₹334
Brand: FlyRobo
Model: FR-01-811
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.
ECGs can be extremely noisy, the AD8232 Sin..
₹398 ₹829
Brand: FlyRobo
Model: FR-01-562
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also, this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.
Specifications and Fea..
₹43 ₹95
Brand: FlyRobo
Model: FR-01-822
KQ-330 Power Line Carrier module is designed to communicate between two devices through a Power line (e.g 220V power line) without any extra components.
The PLC can transmit the broadband data via the power lines, which are suitable for either residential (at-home) or commercial (offices, apartme..
₹1,162 ₹1,709
Brand: FlyRobo
Model: FR-01-886
KY-017 Mercury Sensor Module consists of a mercury switch, a 680Ω resistor, and a LED that will light up when tilt is detected. The mercury ball will open/close the circuit when the module is rotated.
The Mercury switch module and digital 13 interfaces come with LED to build a simple circuit, the..
₹38 ₹49
Brand: FlyRobo
Model: FR-01-816
The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoids the stimulation to eyes.
The lamp brightness can be adjusted by..
₹51 ₹109
Brand: FlyRobo
Model: FR-01-544
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.
Features :
Usi..
₹30 ₹89