Brand: FlyRobo
Model: FR-01-827
LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typical accuracies. The LM35’s low output impedance, linear output, and precise inherent calibration make interfa..
₹77
Brand: FlyRobo
Model: FR-01-544
The LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the module goes high in the presence of light and it becomes low in the absence of light. The sensitivity of signal detection can be adjusted using a potentiometer.
Features :
Usi..
₹30 ₹89
Brand: FlyRobo
Model: FR-01-819
MAX30100 is an integrated pulse oximeter and heart-rate monitor sensor solution.
It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector.
This par..
₹102 ₹258
Brand: FlyRobo
Model: FR-01-820
The MAX30102 provides a complete system solution to ease the design-in process for mobile and wearable devices. The MAX30102 operates on a single 1.8V power supply and a separate 5.0V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be ..
₹102 ₹399
Brand: FlyRobo
Model: FR-01-653
MAX6675 Module with K Type Thermocouple Sensor Measure 1024°C Temperature sensor makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface for giving an accurate temperature-compensated measurement of the supplied K-Type th..
₹185 ₹399
Brand: FlyRobo
Model: FR-01-840
The MAX6675 Thermocouple Sensor Module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide an accurate temperature-compensated measurement of the supplied K-Type thermocouple sensor.
The..
₹161 ₹298
Brand: FlyRobo
Model: FR-01-784
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the output of the module is low, lower power consumption; When a finger touches the corresponding position, the output of the module is high, if not touched for 12 seconds, it switches to low-pow..
₹41 ₹139
Brand: FlyRobo
Model: FR-01-871
Description:
Materials: Thin Film Packaging
Performance: Precision
Rating: 1 (W)
Frequency characteristics: Low Frequency
Temperature coefficient: NTC
Size: 25mm
Feature:
MF5B series products for synthetic fuses thin-film encapsulation type
Insulating film packaging, the..
₹46 ₹79
Brand: FlyRobo
Model: FR-01-713
Mini 650nm 6mm 5mW Laser Dot Diode Module which is made of copper plastic. Can be driven from 3V to 5V DC so they’re great for your embedded electronics project, robot, or other application.
You require a 3 to 5VDC power supply which you'd get from two standard AAA or AA batteries. These diodes a..
₹19 ₹59
Brand: FlyRobo
Model: FR-01-787
The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to ..
₹69 ₹199
Brand: FlyRobo
Model: FR-01-779
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
₹97 ₹140
Brand: FlyRobo
Model: FR-01-875
MQ2 Gas Sensor is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke, and so on. Based on its fast response time measurements can be taken as soon as possible. Also, the sensitivity can be adjusted by the potentiometer.
MQ2 gas ..
₹77 ₹119