Menu
Your Cart

Wifi Telemetry module for Pixhawk Flight Controller

Wifi Telemetry module for Pixhawk Flight Controller
Wifi Telemetry module for Pixhawk Flight Controller
Wifi Telemetry module for Pixhawk Flight Controller
-41 %
Wifi Telemetry module for Pixhawk Flight Controller
Wifi Telemetry module for Pixhawk Flight Controller
Wifi Telemetry module for Pixhawk Flight Controller
Wifi Telemetry module for Pixhawk Flight Controller
₹999
₹1,699

(inc GST)

  • Stock: In Stock
  • ₹9 FlyRobo Cashback.
  • SKU: FRM-02-841

This is a 2.4Ghz wifi telemetry module that is compatible with the Pixhawk flight controller. This is easy to use and great for the drone user because user dose not required a Ground module if they use this telemetry module because almost every device support 2.4Ghz wifi so that built-in wifi of Mobile/Tablet/computer /laptop will be work as the ground module.

Feature:

  • Easy to use
  • Universal 2.4Ghz Compatable
  • Small size
  • Very Light Weight
  • autopilot and PX4 compatible
  • Wifi standard: 802.11 b/g/n

 

Package Content:

1 x Wifi Compatible Telemetry module for Pizhawk flight controller 

Technical
Antenna Type

External Antenna.

Range

~200m

Security

WPA/WPA2

Type

Wireless

Wireless Standards

802.11 b/g/n

Questions8 Answers8 | Expand All
Can i get GST invoice for the order ?
Shubham Bhausaheb Modake
  • Yes, You can claim GST credit if you have a GST number. To do it you have to mention the GST number at the time of checkout. GST option appears in the Billing Address. If you are an existing customer of flyrobo then you can log in to your account ( Account → Address Book → Edit Address) and Then enter your GST number.
    FlyRobo[ 16/11/2022 ]
    Was this answer helpful?489
What is password of this telemetry
Password
Sandeep Kumar
  • Default SSID and password is • SSID: ArduPilot • Password ardupilot But you can change by from 192.168.4.1.
    Flyrobo[ 03/03/2023 ]
    Was this answer helpful?5
Wifi(ardupilot) is connected but i am not able to connect with mission planner or q ground control i have done all instructions given in manual
Sandeep
  • Make sure that the bund rate of pixhawk "SERIAL1_BAUD = 921 (921600 baud)" and the wifi module should be the same. To check the wifi module bund rate you need to connect to Ardupilot wifi and enter URL 192.168.4.1 in the browser. over there you can check the bund rate.
    Flyrobo[ 03/03/2023 ]
    Was this answer helpful?0
Can this module be used with APM 2.8
Can this module be used with APM 2.8
Suresh
  • It will not not work with APM 2.8.
    FlyRobo[ 09/05/2022 ]
    Was this answer helpful?-2
Is this compatable with apm
Sathwik
  • No sir. It is not.
    FlyRobo[ 25/04/2022 ]
    Was this answer helpful?-4
when it powerd up, a new wifi accespoint SSID: Ardupilot is appears, what is the password for connecting it
Dr. Ketan
  • Password is same as SSID in lower case.

    Password is “ardupilot”

    FlyRobo[ 05/02/2022 ]
    Was this answer helpful?-4
Dose it support amp 2.8 flight controller?
Soumik
  • Yes sir, You can use it with the APM 2.8 flight controller. but this product is made for the pixhawk flight controller and it has a 6-Pin connector if you want to use it for the APM 2.8 then you need little modification in it. You need to use a 5-pin connector https://www.flyrobo.in/df13-5-pin-flight-controller-cable.

    FlyRobo[ 07/04/2022 ]
    Was this answer helpful?-6
What is the range of it
Soumik
  • Dear Sir, It is working on wifi 2.4ghz and approx range is up to 500 meter.
    FlyRobo[ 07/04/2022 ]
    Was this answer helpful?-11
Showing 1 to 8 of 8 (1 pages)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: Telemetry

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments